The Payment Terminal offers accessibility modes so that customers with a visual impairment can pay on their own. This article explains how to select a mode and what the customer sees and hears during a payment.
Available modes
The mode is chosen on the terminal for each payment, from the Choose accessibility mode screen.
| Mode | Designed for | What changes |
|---|---|---|
| Visually impaired mode | Customers with low vision | Large text, high contrast and a simple layout |
| Blind mode | Blind customers | Payment optimized with voice guidance and keyboard support |
| Standard mode | All other customers | Default interface with standard text, colors and navigation |
Select an accessibility mode
- Enter the amount and confirm it. The Payment screen appears with the amount and the message "Present or insert card".
- Tap the accessibility icon at the top right of the Payment screen (a yellow circle with a crossed-out eye).
- On the Choose accessibility mode screen, select Visually impaired mode, Blind mode or Standard mode. Each mode comes with a short description.
- Tap Confirm. The terminal returns to the Payment screen.
- The customer presents or inserts the card.
Tip
Select the mode before the card is presented. The accessibility icon is on the Payment screen, where the terminal waits for the card.
Pay in Visually impaired mode
This mode keeps the usual payment steps and makes every screen easier to read.
Enter the PIN
When the card requires a PIN, the terminal displays a PIN pad designed for low vision:
- A large title asks the customer to enter the PIN.
- Each digit sits in a large, high-contrast key with a dark outline on a white background.
- The keys follow the standard phone layout: 1, 2, 3 at the top, then 4, 5, 6, then 7, 8, 9.
- The bottom row holds Cancel on the left (red), 0 in the middle and Validate on the right (green). Both function keys carry a text label, so the colors are never the only indication.
- The PIN is never displayed. A black dot appears for each digit entered.
Payment result
After the PIN is validated, the terminal shows an authorization in progress screen. It then displays the result with the amount, for example "Approuvé 1,00 €", and asks the customer to remove the card.
Pay in Blind mode
In Blind mode, the terminal guides the customer with spoken instructions and sounds. The customer does not need to see the screen.
Spoken instructions
The terminal speaks at three moments of the payment:
- When the payment starts: it announces the total amount, explains how the PIN pad is laid out and how to use it, then asks the customer to insert or tap the card.
- Before the PIN entry: it repeats the PIN pad layout and how to select a key.
- At the end of the payment: it announces whether the transaction was successful, failed or canceled.
Enter the PIN
The PIN pad uses the standard phone layout, with Cancel on the bottom left, 0 at the bottom center and Validate on the bottom right. The customer enters the PIN as follows:
- Slide a finger onto the screen. The terminal speaks "Cancel" or "OK" when the finger reaches the corresponding key. Digits are not spoken: beeps help the customer find the right key.
- When the finger is on the desired digit, lift it and double tap anywhere on the screen to enter that digit.
- Repeat for each digit of the PIN.
- Move to the Validate key at the bottom right of the screen (spoken as "OK"), then double tap anywhere to confirm.
- To cancel the transaction, move to Cancel at the bottom left, then double tap anywhere.
Note
If the finger is too high on the screen, the terminal announces that the PIN pad is below.
If the terminal is fitted with tactile markings around the edge of the screen, they mark the middle of each row and column. The row and the column of the digit 5 have two markings, which helps the customer find the center of the PIN pad.